What are the Uses of the Solenoid Valve?

Solenoid valve is industrial equipment controlled by electromagnetic, and it is an automatic basic component used to control fluid. It belongs to the actuator and is not limited to hydraulic and pneumatic. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium. The solenoid valve can be matched with different circuits to achieve the desired control, and the control accuracy and flexibility can be guaranteed. There are many kinds of solenoid valves. Different solenoid valves play a role in different positions of the control system. The most commonly used ones are check valves, safety valves, directional control valves, speed control valves, etc.

There is a closed cavity in the solenoid valve, with through holes at different positions, each hole is connected to a different oil pipe, the middle of the cavity is a piston, and the two sides are two electromagnets. Which side of the magnet coil is energized will be attracted to the valve body At the same time, by controlling the movement of the valve body to open or close different oil discharge holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil discharge pipes, and then the piston of the oil cylinder is pushed by the pressure of the oil, and the piston is again Drive the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current on and off of the electromagnet.

Solenoid valve is industrial equipment controlled by electromagnetic, which is used to adjust the direction, flow, speed and other parameters of the medium in the industrial control system. The solenoid valve is controlled by the electromagnetic effect, and the main control method is controlled by the relay. In this way, the solenoid valve can cooperate with different circuits to achieve the desired control, and the control accuracy and flexibility can be guaranteed. There are many kinds of solenoid valves. Different solenoid valves play a role in different positions of the control system. The most commonly used ones are check valves, safety valves, directional control valves, speed control valves, etc.

There is a closed cavity in the solenoid valve, and through-holes are opened at different positions. Each hole leads to the oil pipe of a different solenoid valve. There is a valve in the middle of the cavity, and two electromagnets on both sides. Which side is attracted to, by controlling the movement of the valve body to block or leak different oil discharge holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil discharge pipes, and then push the oil cylinder through the pressure of the oil The piston drives the piston rod, and the piston rod drives the mechanical device to move. In this way, the mechanical movement is controlled by controlling the current on and off of the electromagnet.

Yuyao Xinsheng Solenoid Valve Co., Ltd. is a solenoid valve manufacturer and other products such as Glass Tube Rotameter, welcome to visit our official website.